As spring turns to summer and the vegetation grows, your choice of shooting position might change – it might have to change. Flexibility and adaptability are key. So what to do when shooting from a standing position, off sticks, leaves you too exposed and a shot from the prone position isn’t possible because of the height of the cover? This quick and easy-to-make tripod could be just the ticket.
Mark the poles at equal lengths. When upright, they should be level with your eyebrow line when you are sitting on the ground. Cut the poles with the saw.
Tie two of the poles together, then run a cable tie from one of them to the third pole. Then cut the cable ties, leaving an end of a few millimetres. Adjust the position of the cable ties as necessary to achieve the desired tripod structure. It is a good idea at this stage to test the height of the tripod when sitting down in a shooting position.
Cut the socks into rings that are an inch thick. Wrap a ring of fabric around each of the poles, above and below the cable ties, folding them back on themselves to ensure a snug fit. This fabric will serve as padding, protecting your rifle stock and ensuring the tripod can be deployed and carried quietly.
Once you are happy with the positioning of the padding and function of the tripod, cut lengths of tape and wrap them tightly around the fabric and cable ties, being sure not to tape the poles together and hinder their movement.
Depending on the type of poles used, you may have sharp ends remaining where you have cut them. Tape over these ends.
Shooting well from a sitting position can take a bit of getting used to. Practise deploying your tripod and making the adjustments necessary to each leg in order to take a shot at various angles.